Battery not holding up like it used to? This is the easiest repair to perform yourself. This ipaq h3800 replacment battery kit comes with very detailed instructions and the tool necessary to perform the replacement.

Includes the black plastic at the top and the four action buttons but not the center joypad button. If the black plastic speaker cover is broken after a fall, this is the only way to replace it. This piece also includes the power button, so if yours has disappeared into the case, this is how to get it back!

Similar to the ballast in a traditional florescent light fixture, this drop-in board provides power for the H38xx's LCD light tube. The 38xx Inverter board requires no soldering to install. This part causes many of the backlight problems with the H38xx (flickering, backlight out, intermittent backlight)

This tool is all that is needed to completely disassemble and reassemble any model of iPaq (except the 19xx or 4xxx). You can make a trip to Sears or any major hardware store in search of the special tools you need or order this one tool here.

The is the perfect replacement stylus for your iPaq. This is not some generic plastic pointer, this metal bodied pen has a solid feel for improved legibility and tactility and has a sensitive stylus tip that will not scratch or damage your PDA screen. This stylus pen also features a removable top with the "reset pin" located underneath.

This stylus is like using an expensive ink pen. There are much more expensive stylus pens for your iPaq, but there are none better! Of course, this stylus pen fits perfectly in the iPaq's built-in slot.

This is the same Foxconn sync connector used in your iPaq. If the sync connector has become loose or no long provides a connection with your computer, chances are that the sync connector needs to be replaced. Do you receive the 'USB Device Not Recognized' or similar error in Activesync? Does your iPaq fail to charge through the sync port?

We can supply just the part if you are confident that you can desolder the existing connector - and resolder the surface mount component without inflicting more damage than already exists.... or you can simply send it in to let the experienced iPaqRepair technicians repair your iPaq for a few dollars more.

The iPaqRepair PDA Tool Kit contains the following micro-precision tools: T5 Torx Driver, T6 Torx Driver, 00 Phillips Screwdriver, Flat Head Screwdriver and Nylon Case opening Tool. Make sure you have the correct tool for the job - this PDA Tool Kit has been assembled by our technicians for PDA repairs (but contains the necessary tools for most small electronic devices - cellphones, cameras, etc..).

If you see broken glass but not "bleeding" dark ink beneath the break, this is the only part of the LCD you need. This is a pretty difficult repair to perform yourself, but saves you a bundle over replacing the entire screen.

If your screen is smashed to the point that you see what appears to be "bleeding" dark ink beneath the screen layers, you need this entire LCD replacement. This repair is not that difficult to perform and comes with very detailed instructions.

If you know your sd card is good but your iPaq no longer reads or writes to the card, you probably need to have the SD Slot replaced. Another common failure is that the card stops ejecting, or worse yet, won't stay secured in the SD slot. This is a surface mount component on the mainboard and the possibility for inflicting more damage than already exists is high if you are not experienced at this sort of repair. You can order just the part below, or click the "order service" icon below to create a work order and have one of our experienced iPaq technicians handle the job for you.

This audio jack is for the h3800 series. This is a solder-on part, please be careful if installing yourself. You can easily inflict more damage than already exists! - If your sound works with headphones but not without, this is the part you need replaced.

This is a replacement H3835 mainboard for the iPaq h3800 series (64mb ram, 32mb rom , non-bluetooth). If you've sent your unit into a repair facility and they told you the mainboard needed to be replaced, this would be the item you need. Often, the mainboard is replaced when memory or processor functions are defective or after a liquid spill.

This adapter allows you to connect the sync port on the bottom of your iPaq directly to any iPaq charger. With this adapter, you don't need to have the cradle, just a car or wall charger to get power to your iPaq. Replaces Compaq/HP OEM part number 253652-B21. This adapter works with all iPaq 38xx, 39xx, 5xxx and 22xx models.

This is a replacement for the OEM iPaq wall charger. This part replaces the original charger for almost all of the iPaqs. You have so much valuable data stored in that little box, why not keep one at the office and one at the house? This comes with the adapter already on end of the cable and comes with a easy flip wall plug to make this an easier soution to carry around.

This is a replacement for the OEM iPaq USB / Serial docking cradle. This is for the sync cradle only, the charger must be purchased separately. This will allow you to sync your iPaq 38xx / 39xx / 5xxx serial iPaq with your PC. It only makes sense to keep one at the office and one at the house.

This charger will allow you to keep the iPaq topped off from a normal 12v auto lighter adapter. This aftermarket iPaq car charger has built-in protection from electrical surges and has a charging indicator l.e.d. to let you know that the juice is flowing. The lithium polymer battery in your iPaq is best preserved by keeping the charge "topped off" according to the manufacturer, what better way to accomplish that? This iPaq car charger is designed for the 38xx / 39xx / 22xx / 5xxx series iPaqs only with the sync adapter built right onto the cable so there is no need to buy an additional adapter to plug it into the sync port for charging.

The oval center button - or "action button"

33% more capacity than Compaq # 253512-B21, HP # FA127A. Provides rechargeable, removable battery power for either your PC or Compact Flash Expansion Pack Plus product. Removable 1200mAh battery enables you to keep your Compaq iPAQ Pocket PC running longer so you don't have to hurry back to your desk to charge. Easy to install and remove, this battery can be recharged with the iPAQ Pocket PC in your Desktop Cradle or with the optional Battery Charger. Compatible with Expansion Pack Plus Products Only. This aftermarket battery is manufactured to meet or exceed the OEM specifications and is a great value.

All the power you want - All the power you need! You can double (or more) the battery capacity of your iPAQ Pocket PC by using this battery on your PC Card or CF Card Expansion Pack Plus Jacket. The Extended 2200mAh Removable Battery is compatible with the PC Card and CompactFlash Card Expansion Pack Plus jackets and the Standup Battery Charger. Get this extra battery for the road when you are away from a power source to eliminate downtime.

This is a battery for the Expansion Pack Plus Jacket - not for the iPaq itself.

Combining the features of a travel charger and a desktop charger for your extra Expansion Pack batteries, the stand-up battery charger recharges both the Slim and Extended batteries. You'll never run out of battery power. The battery charger comes with a convenient desktop base and wall charger (charger works with iPaq cradle as well) or it can be used by itself when you're traveling.

- Double-sided adapter recharges up to two Slim and Extended batteries at a time (Slim and Extended batteries not included, please purchase separately).

- Convenient desktop base

- Can be used by itself when traveling

- Compatibility: FA129A#ADA - iPAQ h3600, h3700, h3800, h3900, h5400, and h5500 series Expansion Pack Plus Batteries.

This is not just another screen protector and can't even be compared to those cheap plastic sheets you buy by the dozen. This PREMIUM screen protector from the Brando Workshop is considered by many to be "The Perfect iPod Screen Protector! " This screen protector offers not only protection against scratches on the front side of the Ipod, it also comes with a rear casing protector as well. If you want to keep your Ipod in Like New condition, you will have to put one of these on your unit.

Very easy to apply and can be removed, washed and reapplied time and time again.

Direct from the Brando Workshop. Mini retractable cable for Data HotSync and battery charging via USB for the iPaq h5xxx PocketPC. This short short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data and charge your pda direct through the sync port - there is no need for a seperate charger.

If you just buy one more accessory for your iPaq, this is on the one to get! If you don't have one of these in your notebook case, you are traveling light.

This case is super-tough, surprisingly light and very good looking! Made from anodized aircraft grade aluminum and designed to keep the functionality of your iPaq, allowing access to all ports without removing from the case. Matching the beauty and form of the iPaq design, it fits like a glove. The rock-hard exterior is lined with neoprene to prevent scratching and provide even more shock protection.

The Secure Digital (SD) Memory card direct from HP is the only one guaranteed to be compatible with your iPaq's memory expansion slot. There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents.

Sandisk is an industry leader in Secure Digital technology. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds 256mb of data. There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents and still leave room for document and music storage.

Lexar Media Technology is an industry leader in Secure Digital technology. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds 512mb of data - that's half a gig of memory added to your iPaq! There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents and still leave room for plenty of document and music files.

Sandisk is a premier manufacturer of Secure Digital (SD) memory cards. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds a full GIG of data ! Just close your eyes and imagine the power of having a full GIG of data in the palm of your hand. What two better tools, your iPaq PocketPC and enough storage to keep all of your important files available to you in an instant?

Sandisk is a premier manufacturer of Secure Digital (SD) memory cards. This card holds TWO FULL GIGS of data ! Just close your eyes and imagine the power of having that much data in the palm of your hand. What two better tools, your iPaq PocketPC and enough storage to keep all of your important files available to you in an instant?