This touch screen fits the h63xx (h6300, h6310, h6340) iPaq models only. If you have broken glass but do not see what appears to be "bleeding ink" beneath the screen, you do not need to replace the entire LCD, just the touch screen assembly itself.

Now, this is absolutely the most difficult repair for the iPaq to perform yourself and the touchscreen for this particular model is especially difficult to replace because the cable is integrated (resistance welded) with the lcd data cable itself. This part is sold without tools or instructions.

If you prefer not to risk the do-it-yourself repair, feel free to send it in to our service center and have one of our technicians perform the transplant without worries.

Broken glass? Don't worry! If you see what appears to be white or dark "blotches" beneath the screen, you're going to need this entire replacement LCD. This LCD replacement includes the digitizer / touchscreen and will get your iPaq h63xx pda/phone back in service after a nasty fall. This part comes with the necessary Torx / 00 Phillips screwdrivers but does not come with instructions. While not the easiest repair to perform yourself, there is no soldering involved in this repair. Give our technicians a call at (512)258-4500 or open a service work order if you would rather send it in for them to handle.

If it hasn't happened yet, it will. Sooner or later you will snag the black antenna cover on something and rip it right off. Boy, it that thing UGLY without it! No tools are needed, just pop this replacement right back in place and nobody will ever know what happened.

This is a 2nd Generation of the antenna cover which has a much more secure fit - not simply a replacement, this is an improvement over the original.

This is the same Foxconn sync connector used in your iPaq. If the sync connector has become loose or no long provides a connection with your computer, chances are that the sync connector needs to be replaced. Do you receive the 'USB Device Not Recognized' or similar error in Activesync? Does your iPaq fail to charge through the sync port?
We can supply just the part if you are confident that you can desolder the existing connector - and resolder the surface mount component without inflicting more damage than already exists.... or you can simply send it in to let the experienced PDASmart technicians repair your iPaq for a few dollars more.

This battery is an improved replacement for the original battery in your tMobile / HP iPaq h6300 Series PocketPC. With a rated capacity of 1800mAh, this is the perfect replacement for the standard HP battery. Why recharge twice a day? Keep an extra battery charged and ready and never be without power or attached to a cable (otherwise known as the ol' "ball and chain").

This is the best upgrade you can perform to your iPaq pda phone. The battery boasts a whopping 3600mAh of capacity (at least twice as much capacity as the original). This battery is thicker than the original battery, so this may not fit if you carry your h6300 series in a case. This battery is specifically designed for the iPaq h6300 series (iPAQ 6315, iPAQ 6340, iPAQ 6345, iPAQ 6360 or iPAQ6365).

The iPaqRepair PDA Tool Kit contains the following micro-precision tools: T5 Torx Driver, T6 Torx Driver, 00 Phillips Screwdriver, Flat Head Screwdriver and Nylon Case opening Tool. Make sure you have the correct tool for the job - this PDA Tool Kit has been assembled by our technicians for PDA repairs (but contains the necessary tools for most small electronic devices - cellphones, cameras, etc..).

This is the one you've heard about! The Innopocket Metal Deluxe Case for the HP iPAQ h63xx is made of anodized aircraft grade aluminum and molded to match the profile of your iPaq 63xx. Thin neoprene lining holds your iPAQ securely in place and offers protection. Precise cutouts give access to all vital buttons and the transparent plastic front panel keeps you information visible. This premium case has a removable belt clip and post system so your iPaq / Phone will always be handy.

This is the perfect replacement stylus for your iPaq. This is not some generic plastic pointer, this metal bodied pen has a solid feel for improved legibility and tactility and has a sensitive stylus tip that will not scratch or damage your PDA screen. This stylus pen also features a removable top with the "reset pin" and a ballpoint pen conveniently located underneath.

This heavy-weight stylus is like using an expensive ink pen. There are much more expensive stylus pens for your iPaq, but there are none better! Of course, this stylus pen fits perfectly in the iPaq's built-in slot.

This is not just another screen protector and can't even be compared to those cheap plastic sheets you buy by the dozen. This PREMIUM screen protector from the Brando Workshop is considered by many to be "The Perfect iPod Screen Protector! " This screen protector offers not only protection against scratches on the front side of the Ipod, it also comes with a rear casing protector as well. If you want to keep your Ipod in Like New condition, you will have to put one of these on your unit.

Very easy to apply and can be removed, washed and reapplied time and time again.

This adapter allows you to connect the sync port on the bottom of your iPaq directly to any iPaq charger. With this adapter, you don't need to have the cradle, just a car or wall charger to get power to your iPaq. Replaces Compaq/HP OEM part number 253652-B21. This adapter works with all iPaq h63xx, rx3xxx, rz17xx, h38xx, h39xx, h5xxx and h22xx models.

This is a replacement for the OEM iPaq wall charger. This part replaces the original charger for almost all of the iPaqs. You have so much valuable data stored in that little box, why not keep one at the office and one at the house? This comes with the adapter already on end of the cable and comes with a easy flip wall plug to make this an easier soution to carry around.

This charger will allow you to keep the iPaq topped off from a normal 12v auto lighter adapter. This aftermarket iPaq car charger has built-in protection from electrical surges and has a charging indicator l.e.d. to let you know that the juice is flowing. The lithium polymer battery in your iPaq is best preserved by keeping the charge "topped off" according to the manufacturer, what better way to accomplish that? This iPaq car charger is designed for the h63xx, rx3xxx, rz17xx, h38xx / h39xx / h22xx / h5xxx series iPaqs only with the sync adapter built right onto the cable so there is no need to buy an additional adapter to plug it into the sync port for charging.

Mini retractable cable for Data HotSync and battery charging via USB for the iPaq h6300 PocketPC Phone. This short short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data and charge your pda direct through the sync port - there is no need for a seperate charger.

If you just buy one accessory for your pda, this is on the one to get.

The Secure Digital (SD) Memory card direct from HP is the only one guaranteed to be compatible with your iPaq's memory expansion slot. There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents.

Sandisk is an industry leader in Secure Digital technology. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds 256mb of data. There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents and still leave room for document and music storage.

Lexar Media Technology is an industry leader in Secure Digital technology. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds 512mb of data - that's half a gig of memory added to your iPaq! There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents and still leave room for plenty of document and music files.

Sandisk is a premier manufacturer of Secure Digital (SD) memory cards. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds a full GIG of data ! Just close your eyes and imagine the power of having a full GIG of data in the palm of your hand. What two better tools, your iPaq PocketPC and enough storage to keep all of your important files available to you in an instant?

Sandisk is a premier manufacturer of Secure Digital (SD) memory cards. This card holds TWO FULL GIGS of data ! Just close your eyes and imagine the power of having that much data in the palm of your hand. What two better tools, your iPaq PocketPC and enough storage to keep all of your important files available to you in an instant?