Broken glass? Don't worry! If you see either white or black "blotches" beneath the broken glass, you're going to need this entire LCD replacement. This iPaq LCD replacement includes the digitizer / touch screen and will get your iPaq rx3000 series (rx 3000, rx3115, rx3400, rx3417, rx3700, rx3715) back in service after a nasty fall. This part replaces the original part on all rx3000 series models.

This touch screen fits the rx3xxx (rx3000, rx3100, rx3115, rx3400, rx3417, rx3700, rx3715) iPaq models only. If you have broken glass but do not see what appears to be "bleeding ink" beneath the screen, you do not need to replace the entire LCD, just the touchscreen assembly itself.

Now, this is absolutely the most difficult repair for the iPaq to perform yourself and the touchscreen for this particular model is especially difficult to replace because the cable is integrated (resistance welded) with the lcd data cable itself. This part is sold without tools or instructions.

If you prefer not to risk the do-it-yourself repair, feel free to send it in to our service center and have one of our technicians perform the transplant without worries.

This replacement battery door / cover fits all rx31xx / rx34xx. I know it is hard to believe, but you are going to lose it sooner or later so you might as well have one handy!

This replacement battery for the iPaq rx3100, rx3400 and rx3700 offers a whopping 2850mAh of capacity (the standard OEM battery is only 920mAh). This battery is thicker than the original and comes with a replacement battery door to accommodate the larger battery - this battery door is dark gray in color for all models. This is the least expensive way to upgrade your PDA.

This replacement 1500mAh battery fits all rx3xxx models. This battery offers more power than the OEM battery in the same size package. Keep this one charged and you'll never be without your little baby!

This replacement battery for the iPaq rx3100 and rx3400 offers almost THREE TIMES the capacity as the original battery in your iPaq (a whopping 3200mAh). Never again do you have to hear the embarrasing question, "Is that an extra battery in your pocket or are you just happy to see me?"

This should be considered a necessity for anyone using the extended features of the "rx" series iPaq. The battery is thicker than the original and comes with a new matching battery door to accommodate the larger battery without sacrificing any form or function of your iPaq. You didn't buy that PocketPC just to wind up attached to a power cord twice a day, did you?

This replacement battery for the iPaq rx3700 offers almost THREE TIMES the capacity as the original battery in your iPaq (a whopping 3200mAh). Never again do you have to hear the embarrasing question, "Is that an extra battery in your pocket or are you just happy to see me?"

This should be considered a necessity for anyone using the extended features of the "rx" series iPaq. The battery is thicker than the original and comes with a new matching battery door to accommodate the larger battery without sacrificing any form or function of your iPaq. You didn't buy that PocketPC just to wind up attached to a power cord twice a day, did you?

The is the perfect replacement stylus for your iPaq. This is not some generic plastic pointer, this metal bodied pen has a solid feel for improved legibility and tactility and has a sensitive stylus tip that will not scratch or damage your PDA screen. This stylus pen also features a removable top with the "reset pin" located underneath.

This heavy-weight stylus is like using an expensive ink pen. There are much more expensive stylus pens for your iPaq, but there are none better! Of course, this stylus pen fits perfectly in the iPaq's built-in slot.

This is the same Foxconn sync connector used in your iPaq. If the sync connector has become loose or no long provides a connection with your computer, chances are that the sync connector needs to be replaced. Do you receive the 'USB Device Not Recognized' or similar error in Activesync? Does your iPaq fail to charge through the sync port?

We can supply just the part if you are confident that you can desolder the existing connector - and resolder the surface mount component without inflicting more damage than already exists.... or you can simply send it in to let the experienced iPaqRepair technicians repair your iPaq for a few dollars more.

The iPaqRepair PDA Tool Kit contains the following micro-precision tools: T5 Torx Driver, T6 Torx Driver, 00 Phillips Screwdriver, Flat Head Screwdriver and Nylon Case opening Tool. Make sure you have the correct tool for the job - this PDA Tool Kit has been assembled by our technicians for PDA repairs (but contains the necessary tools for most small electronic devices - cellphones, cameras, etc..).

This is not just another screen protector and can't even be compared to those cheap plastic sheets you buy by the dozen. This PREMIUM screen protector from the Brando Workshop is considered by many to be "The Perfect iPaq Screen Protector! " This screen protector offers not only protection against scratches or marring on the surface of your iPaq's screen, it actually improves the handwriting performance of your iPaq. If you just buy one accessory to improve your iPaq, this is the one to get.

Very easy to apply and can be removed, washed and reapplied time and time again. Provides anti-glare benefit that is particularly handy in fluorescent lighting or outdoors.

This adapter allows you to connect the sync port on the bottom of your iPaq directly to any iPaq charger. With this adapter, you don't need to have the cradle, just a car or wall charger to get power to your iPaq. Replaces Compaq/HP OEM part number 253652-B21. This adapter works with all iPaq rx3xxx, rz17xx, h38xx, h39xx, h5xxx and h22xx models.

This is a replacement for the OEM iPaq wall charger. This part replaces the original charger for almost all of the iPaqs. You have so much valuable data stored in that little box, why not keep one at the office and one at the house? This comes with the adapter already on end of the cable and comes with a easy flip wall plug to make this an easier soution to carry around.

This charger will allow you to keep the iPaq topped off from a normal 12v auto lighter adapter. This aftermarket iPaq car charger has built-in protection from electrical surges and has a charging indicator l.e.d. to let you know that the juice is flowing. The lithium polymer battery in your iPaq is best preserved by keeping the charge "topped off" according to the manufacturer, what better way to accomplish that? This iPaq car charger is designed for the rx3xxx, rz17xx, h38xx / h39xx / h22xx / h5xxx series iPaqs only with the sync adapter built right onto the cable so there is no need to buy an additional adapter to plug it into the sync port for charging.

This is a replacement front cover for the iPaq rx31xx and rx34xx series ONLY. This part includes the four launch buttons on the bottom of the bezel as well as the action button, button input board and the power button and black sd slot surround at the top of the unit.

This part includes the black decorative ring that surrounds the unit including the voice record button. This part fits the iPaq hx31xx Series Only.

This cover contains everything but the battery door on the back of your iPaq rx31xx model ONLY.

This is the one you've heard about! The Innopocket Metal Deluxe Case for the HP iPAQ Pocket PC rx3100 Series is made of anodized aircraft grade aluminum and molded to match the slim profile of your iPaq rx3100. The neoprene lining on top, bottom and the side holds your iPAQ securely in place. The lock on the side holds the top and bottom of the case tightly together and prevents it from accidentally opening. What a stylish way to protect your investment without impairing the function of the iPaq at all. This new design from Innopocket includes a belt clip so you can keep your iPaq handy.

Protect your iPaq investment! The Innopocket Metal Deluxe Case for the HP iPAQ rx3400/rx3700 Series is made of anodized aircraft grade aluminum and molded to match the slim profile of your iPaq rx3400 or rx3700. The neoprene lining on top, bottom and the side holds your iPAQ securely in place. The lock on the side holds the top and bottom of the case tightly together and prevents it from accidentally opening. There's even a sliding door to keep the camera lense protected when not in use. What a stylish way to protect your investment without impairing the function of the iPaq at all. This new design from Innopocket includes a removable belt clip so you can keep your iPaq handy.

This is a complete mainboard for the iPaq rx3115 model only.

This is a complete mainboard for the iPaq rx3715 model only.

Direct from the Brando Workshop. Mini retractable cable for Data HotSync and battery charging via USB for the iPaq rx3xxx PocketPC. This short short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data and charge your pda direct through the sync port - there is no need for a seperate charger.

If you just buy one more accessory for your iPaq, this is on the one to get! If you don't have one of these in your notebook case, you are traveling light.

The Secure Digital (SD) Memory card direct from HP is the only one guaranteed to be compatible with your iPaq's memory expansion slot. There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents.

Sandisk is an industry leader in Secure Digital technology. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds 256mb of data. There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents and still leave room for document and music storage.

Lexar Media Technology is an industry leader in Secure Digital technology. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds 512mb of data - that's half a gig of memory added to your iPaq! There is no more inexpensive way to increase the storage capacity of your iPaq than to buy one of these and pop it in for plug-and-play memory. Probably the wisest thing you can do is purchase of these just to perform quick, routine backup of your iPaq's contents and still leave room for plenty of document and music files.

Sandisk is a premier manufacturer of Secure Digital (SD) memory cards. These SD memory cards are guaranteed to be compatible with your iPaq's memory expansion slot. This card holds a full GIG of data ! Just close your eyes and imagine the power of having a full GIG of data in the palm of your hand. What two better tools, your iPaq PocketPC and enough storage to keep all of your important files available to you in an instant?

Sandisk is a premier manufacturer of Secure Digital (SD) memory cards. This card holds TWO FULL GIGS of data ! Just close your eyes and imagine the power of having that much data in the palm of your hand. What two better tools, your iPaq PocketPC and enough storage to keep all of your important files available to you in an instant?

This Transcend 4gb SD card comes with a manufacturer's Lifetime Warranty and boasts Ultra Performance SLC Flash with 150x speed. Did you ever imagine that you could store a whopping 4 gigabytes of data or music on your pda? Transcend PN TS4GSD150