THIS IS NOT A MISPRINT - ALMOST TWICE THE CAPACITY OF THE OEM BATTERY Finally, more battery life for your new 4th Generation iPod! The 4th Generation iPod (with the sync port on bottom rather than the firewire port on the top and the gray new "click-wheel" technology) comes with a 630mAh internal iPod battery and our new replacement internal battery offers you almost 100% increase over the capacity of the original!

The Do-It-Yourself kit comes complete with very detailed instructions and all the right tools to do the job without damaging your iPod (please don't pry open that case with a flat-tipped screwdriver!). We had this battery developed with the same lithium-ion polymer battery technology as the original and it is rated at 1200mAh capacity.

Now this is not the easiest repair to perform and if you do not feel comfortable operating on your iPod, open a work order and send it in for our technicians to handle.

Of all the places for your iPod to land when you dropped it... We can repair or replace the LCD in your 4th generation iPod and get you back in business quickly (the 4th Generation iPod has a sync port on the bottom of the unit rather than the firewire port on the top and has a GREY touch sensitive scroll wheel and action buttons integrated on the scroll wheel - This LCD will not fit other Generations of iPods). Order the part below or open a repair order and let our qualified technicians repair or replace your LCD and put that iPod back in service!

Ouch! It seems like it would take more to turn that beautiful new iPod Video into such an ugly duckling! You wouldn't think that slipping it into your pocket with your keys (like they do on the commercial) would scratch up the screen like it has - but as you may have already discovered, it doesn't take much to make that pretty new iPod turn into something hideous that you keep hidden in your pocket. This is the entire front plastics including the clear cover for the lcd (but not the lcd itself) but does not include the scroll/click wheel.

These are brand new bezels - not a scratch on them - just like yours was before you used it the first time. What a perfect time to add the clear crystal case (available on this page as well) to keep this from happening again.

The entire "guts" of the iPod are built into the front bezel, so if this seems like more of a challenge than you are willing to handle, send it in for one of our qualified technicians to perform the plastic surgery for just a few dollars more. This is a WHITE Bezel.

Is the audio port / headphone jack of your 20gb 4th generation iPod only working out of one channel or the other? Are the plastics cracked or broken and your headphones held in place with duct tape? Order this part to replace your connector or open a repair order below and let our qualified technicians repair or replace your connector to get you back in stereo!

Is the audio port / headphone jack of your 4th generation 40gb or 60gb iPod only working out of one channel or the other? Are the plastics cracked or broken and your headphones held in place with duct tape? Order this part to replace your connector or open a repair order below and let our qualified technicians repair or replace your connector to get you back in stereo!

These are OEM Apple iPod earbuds. Each set of earbuds includes two sets (4pcs) of replacement foam pads.

Our repair center looks at dozens of iPods every day that require repairs (sometimes expensive) because of damage caused to the audio jack by aftermarket earbuds / headphones. If the length of the plug is too long, the audio jack of the iPod itself is damaged, audio is distorted or one channel drops from the audio output.

Eliminate the possibility of damage and make your iPod sound like it did when you first got it.

The Metal Deluxe Case for Apple iPod 4G series is made of 100% anodized aircraft-grade aluminum. The case is designed to preserve the sleek profile of the 4G iPod and still gives full access to your digital music player while in case. Cutouts give easy access to headphone port, remote port and all vital iPod controls. The interior of the case is lined with neoprene to cushion your iPod from impact shocks. With this form-fitting metal case, your iPod investment is well protected.

This Innopocket case comes with a removable belt clip and post system.

Replacement 20gig hard drive for the 4th Generation iPod. Say good-bye to that sad face icon - listen to your music without the sound of grinding media in the background.

You can either order the part kit below or send it in for our technicians to perform the transplant and get your iPod back in service.

THIS DRIVE WILL FIT ANY 4th GEN MODEL IPOD. IF YOU WANT TO DOWNGRADE FROM A HIGHER CAPACITY, YOU WILL NEED USE A SPACER SO THE HARD DRIVE WILL NOT BE LOOSE INSIDE.

Replacement 40gb hard drive for the 4th Generation iPod. Say good-bye to that sad face icon - listen to your music without the sound of grinding media in the background.

You can either order the part kit below or send it in for our technicians to perform the transplant and get your iPod back in service. (If you are ordering this drive to upgrade a smaller capacity drive, YOU WILL NEED TO ORDER OUR REPLACEMENT REAR COVER TO COMPENSATE FOR THE DRIVE SIZE DIFFERENCE. THE SAME AUDIO JACK CAN BE USED ON THE NEW HOUSING.

Replacement 60gb hard drive for the 4th Generation iPod. Say good-bye to that sad face icon - listen to your music without the sound of grinding media in the background.

You can either order the part kit below or send it in for our technicians to perform the transplant and get your iPod back in service. (If you are ordering this drive to upgrade a smaller capacity drive, YOU WILL NEED TO ORDER OUR REPLACEMENT REAR COVER TO COMPENSATE FOR THE DRIVE SIZE DIFFERENCE. THE SAME AUDIO JACK CAN BE USED ON THE NEW HOUSING.

Are you looking to upgrade your 4th Gen hard drive to a 40gb or even a 60gb? If so, you will need to replace your rear housing. These are USED rear casings that will fit your 40gb or 60gb hard drive and are a must to upgrade from a 20gb or 30gb hard drive. Again these are used rear casings.

Does your iPod look like a worn down door handle? If so, you need to replace the rear housing with a new one. These are used rear housings that will fit the thin iPod 20gb.

Have you taken your iPod for a swim? Having connection problems but the iPod seems to function fine when not trying to sync with your computer? Having power problems that a software update or battery didn't cure? The do-it-yourself types can order a replacement mainboard to get your iPod back in service quickly. This is a bare board for the 4th Generation Mono screen- it does not come with the hard drive, scroll wheel or lcd attached and only works with the mono lcd - it will not work with the color lcd (call for this part).

If all of this seems to be more than you want to tackle, feel free to send it in for one of our technicians to handle. If your board can be repaired for less than the cost of a replacement, we will only charge you for the repairs performed (or the mainboard replacement, whichever is less).

This is a replacement for the hard drive cable inside your iPod 4th Generation. This part is frequently damaged when the iPod is disassembled. If you have taken your iPod apart and upon reassembly you get the "file folder" error icon, this would be the first thing to check. If you don't feel comfortable with opening it back up or if you are unsure if this is what is ailing your iPod, just send it in for one of our technicians to take a look. We do not charge a diagnostic fee and can save you the time (and expense) of "part swapping" until you nail the problem part.

Please don't open your iPod's case with a screwdriver! These tools are made of a special nylon polymer that is hard enough to get the case open but not hard enough to crack or chip the acrylic front case. These are the same tools that come with our battery kits and are preferred by iPod mechanics worldwide. These tools come two per set. If you open your iPod's case with anything else, you do so at your own peril.

Use an extra iPod Power Adapter for home, office or travel. The FireWire based adapter allows you to charge your iPod when not connected to a computer. Just plug the adapter into a wall outlet and (depending on model) connect a FireWire cable or iPod Connector to FireWire cable to your iPod for recharging (refer to your iPod User Manual for correct cable type). Supports all iPods.

This clear silicone gel case for the 4G iPod surrounds your vulnerable iPod with a soft silicone skin. This case comes complete with a detachable swivel belt clip and carrying strap. This case preserves the stylish appearance of your iPod but makes it much easier to grip in your hand or on your car's dashboard. With this form-fitting silicone case, your iPod investment is well protected.

Direct from the Brando Workshop. Mini retractable USB to iPod cable for HotSyncing the iPod Photo, 3rd Generation, 4th Generation iPod and iPod Mini (Units with the Sync Port/Dock Connector on bottom). This short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data on the go.

Direct from the Brando Workshop. Mini retractable FIREWIRE to iPod cable for HotSync and battery charging for the 3rd Generation iPod, 4th Generation iPod and iPod Mini (Units with the Sync Port/Dock Connector on bottom). This short cable is easier for carrying anywhere and one quick pull on the cable ends extends the cable to a full 31 inches and allows you to sync your data and charge your PDA direct through the sync port - there is no need for a separate charger.

The Auto/Car Charger works in all iPods with the sync port on the bottom of the unit. Never be without your tunes... keep that lithium battery topped off whenever possible. How can you live without this?

This is the OEM USB sync cable for your iPod. The most common cause of syncing problems - you can't afford to not have an extra (and you can't just pick these up anywhere when you need one). Every iPod user needs at least one extra cable and the smart owner will have a couple of extras.

This is the OEM FIREWIRE sync cable for your iPod. The most common cause of syncing problems - you can't afford to not have an extra (and you can't just pick these up anywhere when you need one). Every iPod user needs at least one extra cable and the smart owner will have a couple of extras.

The iPaqRepair PDA Tool Kit contains the following micro-precision tools: T5 Torx Driver, T6 Torx Driver, 00 Phillips Screwdriver, Flat Head Screwdriver and Nylon Case opening Tool. Make sure you have the correct tool for the job - this PDA Tool Kit has been assembled by our technicians for PDA repairs (but contains the necessary tools for most small electronic devices - cellphones, cameras, etc..)

Use an extra iPod Power Adapter for home, office or travel. This is a USB wall charger that is used to charge your iPhone from any 110v outlet instead of always having a computer around.